Technical Info
Cartridge Type: Condenser (electret bias)
Frequency Response: 50 to 20,000 Hz
Polar Pattern: Supercardioid
Output Impedance: Rated at 150 ohms (100 ohms actual +/-20%)
Recommended minimum load impedance: 800 ohms
Sensitivity (at 1,000 Hz):
Open Circuit Voltage 54 dBV/Pa (2 mV)
(1 Pa = 94 dB SPL)
Clipping Level (at 1,000 Hz):
1000 ohm Load ?6 dBV (0.5 V)
Power
Maximum SPL (at 1,000 Hz): 142 dB (0.25% THD, 1000 ohm load)
Self-Noise (equivalent sound pressure level; measured with true rms voltmeter):
25 dB typical, A-weighted
27 dB typical, weighted per DIN 45 405
Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio: 69 dB at 94 dB SPL (IEC 651)*
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Power: Phantom Supply Requirement 11 to 52 Vdc, positive at both pins 2 and 3
Current Drain 1.0 to 1.2 mA
Connector: 3-pin (XLR) professional audio
Case: Aluminum construction with Blue Metallic finish, and hardened steel grille with nickel satin chrome plating
Net Weight: 200 g (7 oz.)
Other Info About This Product
|
User's Guide (PDF)
Shure Warranty Info
For more information about this product
call us at 781-849-1285.
|
Availability
|
*Usually ships within 1-2 business days (see shipping)
|
Pro Sound Service Inc. is the authorized dealer of Shure Products! We are your best source for quality products at great prices.
Call us at 781-849-1285 if you have any questions about ordering this product.
“WARNING” Cancer and Reproductive Harm www.P65Warnings.ca.gov