ASHLY RW-8C
The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang electrical box.
There are eight channels and a master, each with a level control and an on/off button.
Used with the VCM-88C, the RD or RW-8C offers a direct correlation of remote faders to VCM-88C channels, as well as its master fader.
Used with the Protea 24.24M DSP Matrix Processor, and using Protea System Software version 6.4 or higher, each RD/RW- 8C slide fader can be assigned to attenuate any 24.24M input, output,
or input/output combination, limited only by the number of available 24.24M channels.
| Specifications |
RD-8C |
RW-8C |
| Fader Range |
+10dB to -75dB |
+10dB to -75dB |
| Connections |
XLR Male |
Two-piece Euroblock |
| Max Data Cable Length |
|
|
| With VCM-88C |
up to 1000 ft using #24 gauge twisted pair |
up to 1000 ft using #24 gauge twisted pair |
| With 24.24M |
up to 1000 ft using #24 gauge twisted pair |
up to 1000 ft using #24 gauge twisted pair |
| Power Requirements |
phantom powered |
phantom powered |
| Shipping Weight |
3 lbs (1.4kg) |
3 lbs (1.4kg) |
| Dimensions |
7.3”(185mm)L x 3.4(87)H x 1.6(41)D |
7.94”(202mm)L x 4.0(103)H x 0.8(20)D |
| Environmental |
40-120 deg. F (4-49 deg, C)
noncondensing |
40-120 deg. F (4-49 deg, C)
noncondensing |
.png)
.png)