Rane HC 6 ( 100536 ) 6-channel Headphone Amplifier with Independent Volume Controls and Front and Rear outputs - A Headphone Amp with Power to Spare!
The Rane HC 6 is one of the most indispensable products for your studio or live sound gig! Featuring six stereo headphone amplifiers, the HC 6 performs all the headphone-related tasks you need, plus a few more.
The HC 6 provides master stereo inputs which can be used to drive any or all of the six stereo headphone amplifiers. A mono switch is provided on the front panel to drive both channels of all six amplifiers from a common mono source. The HC 6 includes six individual unbalanced stereo inputs to drive any individual amplifier from a separate stereo source. These inputs can be converted to mono balanced inputs through internal jumpers if required. Outputs for all of the HC 6's six channels are provided on both the front panel and the rear panel so that headphones may be connected on either side based on the requirements of a given installation. Two pairs of headphones may be driven from each channel, one pair connected to the front and one to the rear.
The HC 6 is capable of delivering up to 450 milliwatts into headphones with rated impedances between 32-600 ohms. The precise amount of power depends on the exact impedance of the headphone in use and the number of headphones connected to the unit. Under most conditions, the HC 6 produces sound pressure levels in excess of 120 dB. This level is more than adequate for most applications.
So add it up - a 6-channel headphone amplifier capable of driving most headphones to levels in excess of 120 dB! Master input level and stereo/mono control, plus independent channel volume controls. The HC 6 is a great deal!
| Analog Inputs |
(8) 1/4" TRS (mains plus 6 individual) |
| Analog Outputs |
(6) headphone (front and rear) |
| Digital Inputs |
0 |
| Dimensions |
N/A |
| Linkable |
No |
| Monitor Outs |
0 |
| Rack Height |
1U |
| Watts per Channel |
N/A |
