QSC AD-S52T 5.25" Loudspeaker
The QSC AcousticDesign™ AD-S52 is a full range, surface mount loudspeaker with sleek, contemporary styling that fits perfectly into multiple environments and applications including hotels, restaurants, convention facilities, and multimedia environments. The loudspeaker's low frequency driver is magnetically shielded, making the AD-S52 perfect for use near video monitors. Available in black or white, these great sounding, weather resistant enclosures can be painted to match any specific decor.
The AD-S52 is a high output, 2-way design incorporating a 5.25" weatherproof, LF transducer and a 1" neodymium tweeter. This exceptional loudspeaker carries the added benefit of built-in dynamic power protection - thus ensuring system reliability in the event of overload conditions.
The AD-S52T models are equipped with a 70V/100V matching transformer for distributed audio systems. There is a transformer tap switch on the rear panel for setting the power level of the loudspeaker. This switch may also be set for 8-ohm operation, bypassing the transformer completely - providing greater system flexibility compared to most competing products.
The AD-S52 system package includes a ball mount assembly for convenient installation of the enclosure in a wide variety of orientations. If desired, the ball mount adapter's back plate can be removed, reducing the overall depth of the assembly and the footprint of the mount on the wall. Further, the assembly includes a weather resistant input connection cover to protect the 5-way binding post input terminals.
QSC AD-S52T 5.25" Loudspeaker
| AD-S32T |
 |
|
SPECIFICATIONS
|
AD-S32T |
| Configuration |
Compact two way, ported enclosure |
Transducers
Low-frequency
High-frequency |
3" (7.6 cm) weather resistant, polypropylene cone woofer
0.75" titanium dome tweeter |
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB) |
73 Hz - 20 kHz
65 Hz - 20 kHz |
Maximum Output 2
Calculated Peak Output
Calculated Continuous Output |
105 dB SPL
99 dB SPL |
| Nominal Impedance |
8 ohms switchable |
Power Rating
RMS Power Handling3
Recommended Max Amp Power
|
30 W (100 hours IEC)
60 W RMS |
| Sensitivity |
85 dB, 2.83 V, 1 m, free space (4 pi) |
| Nominal Coverage |
100° x 100° |
TRANSFORMERS
|
| Type |
Custom low distortion laminated core, wide bandwidth design |
| Taps |
70 V: 30, 15, 7.5, 3.8 W / 100 V: 30, 15, 7.5 W / 8 ohm bypass |
| Environmental |
Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC 60529 IP-X3 splash rating |
| Agency Rating |
Transformer is Listed UL1876 |
ENCLOSURE
|
| Material |
Injection molded, weather resistant high impact polystyrene |
| Finish |
White or black (paintable) |
| Grille |
Heavy duty powder coated aluminum |
| Connectors |
Screw terminals |
| Mounting Hardware |
Ball mount assembly; yoke mount bracket included |
| Weight |
4 lb (1.8 kg) net
10 lb (4.5 kg) shipping (pair) |
1 All frequency ranges specified refer to measured free field response.
2 Calculated SPL at 1m, (free space, 4 pi), speaker operating at rated RMS power with pink noise within specified frequency range
3 Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.
Specifications subject to change without notice.
