QSC AD-S282H AD-S282H-WH Surface mount speaker, dual 8" weather resistant, 2-way, 90° x 60° rotatable, high power version, ships with yoke mount, available in black or white
AcousticDesign AD-S282H & AD-S282HT
The QSC AcousticDesign AD-S282H is a full range, surface mount loudspeaker with a sleek, contemporary styling that fits perfectly into multiple surroundings and applications including hotels, restaurants, convention facilities, and multimedia environments. The speaker incorporates the Advanced Directivity™ rotatable waveguide. Available in black or white, these weather resistant enclosures can be painted to match any specific décor.
The AD-S282H is a 2-way system housed in a ported enclosure made from injection molded, high-impact polystyrene. This enclosure incorporates two 8" weather-resistant, LF transducers with heavy-duty double roll cloth surrounds. These high output versions employ a 1" exit compression HF driver. The HF driver is coupled with QSC's unique Advanced Directivity rotatable waveguide - enabling the loudspeaker to deliver accurately focused sound, regardless of its mounted orientation.
FEATURES
- Contemporary Style, Weather Resistant Enclosure and Components - ideal for a wide range of applications.
- Dual 8-Inch, 2-Way System - in a lightweight, multipurpose enclosure featuring a heavy duty, powder coated aluminum grill.
- Versatile Mounting Options - The included yoke mount bracket can be used for mounting and aiming the system in vertical or horizontal orientations. Provision for optional Omni-mount™ bracket is built in.
- Advanced Directivity™ Rotatable Waveguide - (90° x 60°) enables the loudspeaker to deliver accurately focused sound, regardless of the enclosure's mounted orientation.
- Low Impedance and Transformer Versions - Standard 8 ohm system is selectable for passive or bi-amp operation while the AD-S282HT transformer version provides taps for both 70V and 100V distributed system use.
SPECIFICATIONS:
|
Configuration
|
Compact two way, ported enclosure |
Transducers
Low Frequency Transducer
High Frequency Transducer |
Dual 8" high power, treated paper cone, 2" voice coil, neodymium magnet
1" high output compression driver |
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB) |
80 Hz - 27.7 kHz
60 Hz - 29.5 kHz |
Maximum Output (SPL at 1 m) 2
Fullrange (passive mode)
LF (biamp mode)
HF (biamp mode)
|
| Continuous |
Peak |
| 120 |
126 |
| 124 |
130 |
| 121 |
127 |
|
Nominal Impedance
Passive
LF
HF |
8 ohms
8 ohms
8 ohms |
Power Rating 3
Passive
LF
HF
|
450 W (IEC 8 hours)
500 W (IEC 8 hours, 50 Hz - 2 kHz)
45 W (IEC 8 hours, 2 kHz - 20 kHz) |
| Recommended Max Amp Power (Passive) |
900 W RMS |
Sensitivity (SPL, 1 W at 1 m) 4
Passive
LF
HF |
93 dB (100 Hz - 10 kHz)
97 dB (200 Hz - 2 kHz)
104 dB (2 kHz - 10 kHz) |
| Nominal Coverage |
90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V) |
| Bass Loading |
Ported, tuned to 60 Hz |
| Transformers |
| Type |
Custom low distortion laminated core, wide bandwidth design |
| Taps |
70V 200, 100, 50, 25 Watts
100V 200, 100, 50 Watts |
| Bypass |
8 ohm bypass on AD-S282HT |
| Enclosure |
| Material |
Injection molded, weather resistant, high impact polystyrene |
| Finish |
White or black (paintable) |
| Weather Resistance |
Yes |
| Grill |
Heavy duty powder coated aluminum |
| Connectors |
Barrier Strip, (switchable: passive/active on AD-S282H) |
| Mounting Hardware |
Yoke Mount (included) |
| Weight |
27.7 lb (12.6 kg) net
35.6 lb (16.1 kg) shipping |
1 All frequency ranges specified refer to measured free field response (full space, 4pi)
2 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
3 Continuous IEC specified test signal
4 Based on nominal impedance, measured in full-space.
Specifications subject to change without notice.
