B&C 10PLB76 10" Woofer
- 800 W continuous program power capacity
- 76 mm (3 in) aluminium voice coil
- 50 – 2500 Hz response
- 98 dB sensitivity
- Aluminium demodulating ring allows a very low distortion figure 800 watt continuous program power
Specifications:
Nominal Diameter 250 (10) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 6 Ohm
Nominal Power Handling (2) 400 W
Continuous Power Handling (3) 800 W
Sensitivity (1W/1m) (4) 98 dB
Frequency Range 50 - 2500 Hz
Voice Coil Diameter 76 (3) mm (in)
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 20 (0.8) mm (in)
Magnetic Gap Depth 8.5 (0.33) mm (in)
Flux Density 1.1 T
Thiele & Small Parameters
Fs 52 Hz
Re 4.8 Ohm
Qes 0.20
Qms 3.4
Qts 0.19
Vas 31 (1.1) dm3 (ft3)
Sd 320 (49.1) cm2 (in2)
Eta Zero 2.2 %
Xmax +/- 6 mm
Xvar +/- 7 mm
Mms 43 g
Bl 18.4 Txm
Le 0.32 mH
Mounting and Shipping Info
Overall Diameter 262 mm (10.3 in)
Bolt Circle Diameter 245 mm (9.6 in)
Baffle Cutout Diameter 230 mm (8.8 in)
Depth 124 mm (4.9 in)
Flange and Gasket Thickness 14 mm (0.55 in)
Net Weight 7.3 kg (16.1 lb)
Shipping Weight 7.9 kg (17.4 lb)
Shipping Box 330x330x160 mm (13x13x6.3 in)
For different impedances, please ask.
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
