Nominal Diameter 250 mm (10 in.)
Nominal Impedance 8 ?
Minumum Impedance 6.9 ?
Power Handling
(60 –600 Hz)
Nominal1 250 W
Continuous Program2 500 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 60-4000 Hz
Voice Coil Diameter 65 mm (2.5 in.)
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 12 mm (1/2 in.)
Magnetic Gap Depth 8 mm (5/16 in.)
Flux Density 1.25 T
Also available in 16 ?, data upon request
Thiele & Small Parameters4
Fs 60 Hz
Re 5.7 ?
Qes 0.19
Qms 6.3
Qts 0.18
Vas 37 dm.3 (1.3 cu. ft.)
Sd 320 cm.2 (49.1 sq. in.)
?0 4.1 %
X max ± 2.4 mm.
Mms 27 gr.
Bl 17.7 Tm
Le 1.3 mH
Mounting and Shipping Informations
Overall Diameter 260 mm. (10.2 in.)
Bolt Circle Diameter 244 mm. (9.6 in.)
Baffle Cutout Diameter 228 mm. (8.8 in.)
Depth 110 mm. (4.3 in.)
Flange and Gasket Thickness 17 mm. (2/3 in.)
Net Weight 7.1 Kg. (15.6 lb.)
Shipping Weight 7.8 Kg. (17.2 lb.)
Shipping Box 320x320x160 mm (12x12x6.3 in.)
2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance. Loudspeaker in free air.
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 4000 Hz.
Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
Pro Sound Service Inc. is a Factory Authorized Service Center and these are Factory B&C OEM Replacement parts. Install this yourself or put Pro Sound Service Inc. to work for you! Call us Toll-Free at 877-776-7631 or email us at info@prosoundservice.com for BEST PRICE.
Check out our B&C Products Page ~ If you don't see a B&C Part or Product that you need on our site or if you're a company that would like to apply for Wholesale Status, please contact us.
Don't compromise your speakers performance by using cheap generic parts. The only way to return your speakers to peak performance is to use genuine B&C parts.
