| Analog Audio Inputs: |
6 mic-level, 2 balanced line- or mic-level |
| 8 female Euroblock connectors, 5.0mm, panel-mount |
| Screw terminals: Audio +; Audio -; Ground |
| 8 male Euroblock connectors supplied in box |
| A/D Conversion: |
48kHz, 24-bit |
| Gain Settings: |
+16dB to +64dB (10 settings) |
| 6-position DIP switch, per channel |
| Max. Input Level: |
Mic: -2dBu; Line: +18dBu |
| Stereo Operation: |
Stereo Link, per channel pair;
Two-position switch (Normal, Link) |
| ADAT®: |
1 ADAT In, 48kHz, 8 channels routed to A- Net Out, Channels 9-16 |
| 1 ADAT Out, 48kHz, 8 channels routed from analog inputs |
| Input Impedance: |
Channels 1-2, without pad: 2.48k ohms
Channels 1-2, with pad: 5.63 ohms
Channels 3-8: 2.68k ohms |
| Freq. Response: |
4Hz-22kHz +0.2dB/- 3db |
| THD +N: |
< 0.003% |
| Crosstalk: |
-90dB |
Signal to Noise:
(unweighted) |
A/D: -105dB |
| Low Cut Filter: |
- 3dB @ 85Hz, -18dB per octave |
| Phantom Power: |
+48 volts, per channel |
| Pad: |
20dB, switchable, Channels 1 and 2 only |
| Mic Input : |
EIN (Equivalent Input Noise): -128dBu |
| (Rs = 150 ohms, 20kHz BW, Gain = +60dB) |
| CMRR (Common Mode Rejection Ratio): 80dB @ 120Hz (Gain = +60dB) |
| Bit Error Rate (BER): |
10-12 |
| Pro16? A-Net®: |
Out: 1; Expansion: 1; EtherCon® connectors |
| A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable |
| Uses unshielded Cat-5e UTP (or better) cable |
| Latency: |
0.880 msec (measured from analog input to analog output) |
| Power Supply: |
Internal, universal switching type; IEC jack |
| Voltage: |
100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL |
|
Dimensions:
|
19? (482.6 mm) wide x 9.25? (243.9 mm) deep; 1U high |
| Weight: |
8 lbs (3.63 kg) |
